This project is read-only.

Frequently Asked Questions

Is Virtual Router Free to use?

Yes, Virtual Router is completely Free. If you've paid for it, then I suggest you demand a refund.

Will I incur extra charges from my ISP using Virtual Router?

The bandwidth the extra devices you have connected to a Virtual Router shared Internet connection will of course count towards your internet service bandwidth. Using Virtual Router functions identically to using a router to share your internet connection. If you have questions regarding how much bandwidth you have allocated and/or what overage charges you may be subject to, then you should contact your Internet Service Provider.

Which Wifi Devices are Supported?

The device support is dependent on you having a driver installed that is Certified for Windows 7 or Windows 8. As far as we know, part of the requirement for a wireless driver to be "Certified for Windows 7" or "Certified for Windows 8" must support the Virtual Wifi and Wireless Hosted Network features of Windows 7.

Unfortunately, in regards to using Virtual Router, any driver that is "Certified for Windows Vista" will work with your Wifi device in Windows 7 or 8, however it will not support the Virtual Wifi and Wireless Hosted Network features.

You can view a list of devices here: Supported Devices

Virtual Router will not start after installation

There are some cases that Virtual Router is unable to start immediately after installation. First you should make sure that you have the latest device drivers installed from the manufacturer of your Wifi device, then if that still doesn't work you should try restarting/rebooting you machine if you havn't already done so.

You can find links to some of the latest drivers for some of the more commonly used Wifi devices here: Supported Devices

Error: "group or resource is not in the correct state to perform the requested operation"

Here's a Hotfix available from Microsoft for a common cause of this problem on Windows 7 and Windows Server 2008 R2:

If the hotfix doesn't work, or you aren't using Windows 7 or 2008 R2, then you could try some of the suggestions at the following link:

How do I know if my computer/hardware supports Virtual Router?

First, you need to have a Wifi device and driver that both support the Windows Virtual Wifi and Wireless Hosted Network features. Drivers that are Certified for Windows 7 or Windows 8 will work.

You can view a list of known supported devices here: Supported Devices

Can I use Virtual Router with Windows Vista or Windows XP?

Unfortunately, Virtual Router will not work on Windows Vista or Windows XP, or any older version of Windows. Virtual Router is only compatible with Windows 7 and Windows 8 since the Virtual Wifi and Wireless Hosted Network features are new in Windows 7 and Windows Server 2008 R2.

What About Windows 7 Starter Edition?

Unfortunately, Microsoft has disabled the Virtual Wifi features in Windows 7 Starter Edition so Virtual Router will not work. This is the only edition of Windows 7 that the software will not work with.

Is the connection encrypted? How secure it this?

The wireless connection is encrypted with WPA2 encryption. Encryption is also required, with no method of disabling it. The security of you "Virtual Router" is dependent on the strength of you Password / Passphrase.

How To Change Device (Connected Peer) Icon

You can open the Device "Properties" dialog one of two ways:
  1. Double Click the Device / Connected Peer
  2. Right Click the Device / Connected Peer and Select "Properties..."


Then click on the "Change Icon..." Button, and Select the Icon you want and click "Save".


Last edited Jun 17, 2014 at 4:33 PM by crpietschmann, version 20


XoLost_AngelOX Jul 10, 2017 at 2:35 PM 
Is there a way to remove and potentially block certain devices from sharing the WIFI connection? A device we don't recognize keeps connecting and we really want it gone. It's slowing down the connection.

Thank you.

TheMildGatsby Mar 14, 2017 at 11:14 PM 
"The group or resource is not in the correct state to preform the requested operation."

On Windows:
1) Open Command Prompt with Administrative Privileges
2) Type in netsh wlan set hostednetwork mode=allow ssid=ssidOfUrChoice key=keyOfUrChoice
3) Start Virtual Router using same SSID and Key

somnathyuva May 31, 2016 at 1:45 PM 
I simply can't use the virtual router. Its not working. I am using Windows 7 ultimate

coolnatg Aug 20, 2015 at 11:57 AM 
Why doesn't this work with windows 10??

gsoo Aug 19, 2015 at 2:47 AM 
Well, I've got Windows 10 running on a Surface 3 Pro. Doesn't start.

crosstraxcmi Jun 25, 2015 at 12:37 AM 
Set up virtual router and it is connected but I cannot connect with other devices. On network page I get No network access for the virtual router. Attached two screen shots:

Please help as I have researched for hours and found nothing on this problem

ax_colleen Jun 13, 2015 at 6:00 PM 
I want to make the virtual router public. How?

mclaine May 12, 2015 at 11:20 AM 
Great tool, thanks a lot! I have only one little issue: Every time I start my laptop the Shared Connection is set to "None". I have to stop Virtual Router, select "LAN" and start it again. Is there a possibility to get Virtual Router autostarted?

virtualrouterPS1 Apr 3, 2015 at 8:55 AM 
Powershell with Virtualrouter for automation simulating button click
#powershell script to automate starting hostednetwork with
#requires WASP module enabled via WASP install script (

#Stop the process running VirtualRouterClient

Stop-Process -processName $Naam

#Start the process

$process = Start-Process -FilePath "C:\Program Files (x86)\Virtual Router\$Naam" -PassThru
$id = $process.Id
Start-Sleep -Seconds 2
$window = Select-Window | Where-Object { $_.ProcessID -eq $id }

# send tabs to complete the default configuration for Router

$window | Send-Keys '{TAB}'
$window | Send-Keys ^a
$window | Send-Keys ualRouter
$window | Send-Keys '{TAB}'
$window | Send-Keys ^a
$window | Send-Keys podapoda
$window | Send-Keys '{TAB}'
$window | Send-Keys '{TAB}'
$window | Send-Keys '{TAB}'

#If hosted network is not started already then start by clicking once.

$notStarted= netsh wlan show hostednetwork | Select-String -pattern "Not Started"
$window | Send-Keys '{ENTER}'

#If hosted network is enabled already then send enter twice to ensure the configuration reflects as it is in this script.

$window | Send-Keys '{ENTER}'
Start-Sleep -Seconds 2
$window | Send-Keys '{ENTER}'


galexbro Mar 29, 2015 at 1:38 PM 
when i used to connect my tab with the wifi connetion it used to loop ""obtaining IP Address"" ...After i Installed virtual router..It solved that problem. I wanna know what changes it does over the ips ,dns and Dhcp so that it solved obtaining ip address loop problem in my tab ... Please do Reply

KCLoewen Mar 4, 2015 at 10:10 PM 
"a device attached to the system is not functioning"
That is all

Patho Dec 6, 2014 at 10:55 AM 
Unfortunately the following device is not supported: intel dual band wireless ac 7260

icodergaurav Oct 1, 2014 at 5:15 AM 
when I try to connect to Virtual Router Manager V1.0 I'm getting this error 'Can not manage Virtual Router. The service is not running." Kindly provide me the solution via email ( to fix this. Thanks in advance.

dmartic Jul 30, 2014 at 12:41 PM 
Is it possible to configure for SSID to be hidden network ?

kyawagwin Feb 26, 2014 at 2:04 AM 
everything is okay with my HP Probook... Great work guys :)

faceimran Jan 10, 2014 at 8:24 PM 
Hi, I have a Lenovo T420. Intel i5-2520M CPU@2.50Ghz and RAM 4 GB.
when I try to connect to Virtual Router Manager V1.0 I'm getting this error 'Can not manage Virtual Router. The service is not running." Kindly provide me the solution via email ( to fix this. Thanks in advance.

Manan203 Dec 21, 2013 at 2:27 PM 
please send me a solution on my email:

Manan203 Dec 21, 2013 at 2:25 PM 
in my windows 8 laptop...after install virtual can.t open & show the message as "group or resource is not in the correct state to perform the requested operation" i resolve this problem...please tell me........

RT9 Dec 1, 2013 at 3:33 PM 
Broadcast Works with DW1501 Wireless-N WLAN Half-Mini Card PCI\VEN_14E4&DEV_4727

Shared connection : not showing Dialup connection ( usb modem connection - dongle)

amit230882 Oct 28, 2013 at 1:16 PM 
Please advice me how to use virtual router with static ip.
I am using LAN Ethernet with very limited connectivity i.e Via proxy Server. so I just wanted to use virtual router to share my LAN Connection (Not for Internet). So that I can configure another static IP with full Internet Access on my Device. Please help how is it possible.

carlluis Aug 22, 2013 at 4:43 PM 
Great app, installed, working in 2 mins! :)
It now works on Win7 with Ralink RT3090 Wireless Network adapter on HP laptop

bipashant Jul 13, 2013 at 12:02 PM 
Woderfull Apps Ever
how can i use captive portal for the wi-fi network transmitted using Virtual Router?

Melissacam Mar 27, 2013 at 6:11 PM 
This blog has an interesting topics thanks for the information ...
<a href="">vermont maple syrup</a>

HardikMB Mar 9, 2013 at 9:03 PM 
I am a Windows 8 Pro user. I want to share internet connection to my android device. I tried Connectify But it causes windows 8 to crash. I also tried some scripts. But fails. I tried VirtualRouter but I can connect,adapter status shows internet connectivity but actually it's not. -- Here is the status of my wi-fi adapter after starting VirtualRouter.
Please Help.

Phinatic Feb 17, 2013 at 6:04 PM 
Can I connect a switch to the virtual router? How would I configure a layer 2 switch to connect to the virtual router?

Rajatbhattarai Jan 12, 2013 at 12:21 PM 
why does it dont work on mobile devices? i started it on computer, my mobile searched the virtual wifi but cant establish a connection!

Pete_Mack Dec 3, 2012 at 11:25 PM 
Does this work on Windows 8? (I am seeing a somewhat different pane for "Network and Sharing Center")

ashishtilak Nov 10, 2012 at 4:20 AM 
how to route through proxy?
I am connecting to internet through proxy server. How to route my VirtualRouter through proxy?

hammadmushtaq Oct 5, 2012 at 3:00 PM 
Dear i have Dell d610 with window 7 and Intel(R) PRO/Wireless 2200BG Network Connection. and the error is Virtual Router could not be started..

shanen Aug 13, 2012 at 7:57 AM 
How does this differ from the hostednetwork included with Windows 7? Actually trying to understand why the hostednetwork works fine with my own minor ISP, but not with a friend's OCN connection from NTT (probably the largest ISP in Japan).

chrissy Jun 24, 2012 at 8:11 PM 
This was working fine for me for months then yesterday I turned laptop on and went clicked to start and all I get now is Virtual Router could not be started, which is quite puzzling for me, if anyone has any suggestions or tips i could try I would be most grateful, I am not very computer illiterate so easy instructions would be helpful. Thank you. Chrissy.

nng28 May 22, 2012 at 6:17 PM 
I got Intel(R) PRO/Wireless 3945ABG and is not supprted

hossein193 Mar 19, 2012 at 12:11 PM 
Finally i could run and use this wonderful App. thanks.
every body have problem to browse and see internet after successful connect to virtual wifi note that firewall can prevent internet stream between your device and virtual wifi. so disable your firewall and try again maybe solve your problem.

BingAndroid Feb 23, 2012 at 3:59 PM 
Hi Guys, this virtual router is really great, I don't need to buy a new wifi router. Thanks for your great works, by the way, is there any update for this software? many thanks.

viloun Feb 16, 2012 at 3:00 AM 
@eis0r Sep 8 2011 at 5:09 AM
Intel® Centrino® Advanced-N 6205 unfortunately not working here on windows 7 64bit with latest driver
is there any alternative?

If you download the "Intel® PROSet/​Wireless Software and Drivers" and use the Intel My WiFi software, then it will enable the "hosted network". Perhaps after you do that, then this will work.

Use this command from DOS to check to see if the hosted network flag is enabled: netsh wlan show drivers | findstr network

And make sure that it says: Hosted network supported : Yes

drakorg Jan 5, 2012 at 7:22 AM 
hi, is there any setting where I can configure some options of the internal DHCP? I'd like to have some ips fixed for some devices when they connect to the wireless network.

skaurus Dec 31, 2011 at 1:56 PM 
Virtual Router isn't worked for me, and following console guide I found out that it's because hostednetwork won't started.

Problem was with disabled Microsoft Virtual WiFi Miniport adapter.

raid1970 Oct 1, 2011 at 12:59 PM 
i have 2 isp and have internet explorer and firfox browser how i can make first isp work the explorer and the 2th isp work firfox some one help me

eis0r Sep 8, 2011 at 11:09 AM 
Intel® Centrino® Advanced-N 6205 unfortunately not working here on windows 7 64bit with latest driver
is there any alternative?

Iason2020 Aug 31, 2011 at 11:11 AM 
Very helpfull tool, thx a lot!
I agree with vjudragon, you need an activated Microsoft Virtual Wifi Miniport Adapter, when having issues in starting virtual router.
As an alternative to the approach describes by vjudragon I recommend the following tool for fast setting creation:

hardysmooch Aug 2, 2011 at 11:51 AM 
Excellent. Works like a dream. I have been using Connectify up until recently but have grown tired of adverts with this "free" product. Well done!

vjudragon Jul 23, 2011 at 5:59 PM 
If getting problem in starting Virtual Router, I may recommend you to use first cmd lines for Creating Microsoft Virtual WiFi Miniport Adapter

Windows 7 has an excellent in-built utility, Wireless Hosted Network (Virtual Wifi) technology, that makes your computer, a wireless access point and you can connect all your network devices by sharing a single internet connection thorough your computer or laptop.

Here’s how to set it up.

1. Open command prompt with Administrator privileges. (You can do it by going to start menu, right clicking on command prompt and selecting “Run as administrator”).

2. Enter the following command:

netsh wlan set hostednetwork mode=allow ssid=Test key=Passkey
(This will create a wireless access-point with SSID of “Test”


3. Open the Networks and Sharing Center

4. Select your mode of connecting to the internet (ethernet, wi-fi, cable etc.)

5. Enable sharing and select special ‘hosted’ interface or Wireless Connection (i.e. Virtual Wifi miniport)

6. Start it

netsh wlan start hostednetwork


And you’re Done!

1. Disable IP6 in Microsoft Virtual WiFi Miniport Adapter or other wireless network.
2.Don't use any Wifi connections before starting Virtual Router may create Problem.
3.In Device Manage download Online, Latest Microsoft Virtual WiFi Miniport Adapter in case of problem.

Then after few days try to connect through Virtual Router

pppoe, you can. Just see this pic to share ; My wireless connection 4 is Microsoft Virtual WiFi Miniport Adapter.

First you need to connect Internet and then start virtual router and then start.
When You successfully share Internet with virtual router you will see this.

Network Connections Page:

Virtual Router Screen Shot:
Color Red: Confidential
Color Black: This may confuse you because I already :)))

Hope it Helps and will save time. :))

zhang024 Jul 11, 2011 at 2:57 PM 
Sir, which is really useful for me, thanks so much. I have another question, can we create dynamically password for each customers? I have a cafe and I want to give them different password when they use my wifi AP. thanks again.

dushy4 May 4, 2011 at 5:31 AM 
The best software to share connection,,,,,i was struggling with ad-hoc connections which had to be manually conected everyday. Also tried to use Internet Connection Sharing but it changes IP address of wireless card and disabled DHCP which make it hard to connect to other wifi networks.

This works like charm,,,, Very helpful,,,keep the good work,,,

Rollyd Mar 8, 2011 at 8:06 PM 
I have windows 7 home and a wireless router and after downloading the program all I get is Cannot start router or similar. What am I doing wrong

Gigabyte Mar 1, 2011 at 1:28 PM 
How do I share a dial-up connection?
It doesn't show up in the shared connection dialog box.

ladiciusevol Dec 16, 2010 at 5:11 AM 
Hi I tried using virtual router, but the service starts, then immediately stops, any ideas on why this happens?

kustardking Oct 30, 2010 at 5:52 PM 
I would actually like to use this software, but it doesn't (or I can't figure out how to) configure the subnet for clients. Also, I'd like to be able to have clients reserve IP addresses so they're consistent between sessions.

Thanks for at least starting an alternative to Connectify. My usage is a VMWare server on a laptop that needs to have iThing devices connect in a "closed circuit" environment when on the road.

tjcool Oct 24, 2010 at 3:40 AM 
Sir i want to develope same app for windows phone.....can u suggest me resources....Thank u

bonalaw Sep 15, 2010 at 10:42 AM 
Sir, I read from that even though the the Virtual Wifi features in Windows 7 Starter Edition is disabled, but still there is way to enable & setup adhoc wifi in Windows 7 Starter edition. So will this change your position that Virtual Router can now run also in Windows 7 Starter Edition?

salwensko Aug 13, 2010 at 2:33 AM 
The program run, but my netbook dont connect. The network is ok, but dont connect to internet. The netbook connect to network, but dont work. in peers conected, i see the netbook. The hostname and ip could not be found. Help. Sorry my english

Kryztoval Jul 8, 2010 at 4:23 PM 
sayoji01: you can only have multiple instances of the Client... but hey, I'll add it as a modification and send it back to the project owner.

BTW: I do believe that this project rocks.

sayoji01 Jun 7, 2010 at 3:31 PM 
in addition, multiple instances of the program is quite not good.

sayoji01 Jun 7, 2010 at 3:29 PM 
hey guys, i suggest that the virtual router have many options to choose from (start with windows, creating profiles....) and i noticed that it only starts the virtual router when you have a network connection... maybe it's better if it can start VR even when not connected on a network.

defza May 24, 2010 at 7:55 AM 
>how can i share my ppoe connection with this?
You should be able to, I did it to share my PPPoE connection dialed by my PC with my PS3 wifi, but I used Connectify ( But I assume this one can do the same.

abv Feb 21, 2010 at 3:27 PM 
how can i share my ppoe connection with this?