virtualrouter Discussions Rss Feed

New Post: Broadcast SSID

dgodfather — Wed, 22 May 2013 18:03:27 GMT

I'd like to see the possibility not have the SSID broadcasted. Possible?

New Post: like the material and it christian louboutin

xingyujuan123 — Wed, 22 May 2013 07:32:00 GMT

I really like the material and it christian louboutin deutschland excellent with the dress. They appear very classy and i like the shape but i not in really like using the rhinestones, don hate them although ;)

10/10

I love these, they may be quite cute and i adore the detailing up the side! I think louboutin kaufen can also be extremely classy. They look like Christian Louboutin boots but i might be incorrect. They have the signature red sole that adds a lovely pop!

three. 8/10

The boots alone get a 10/10 (adore the pointy toe and suede look) as well as the outfit would as well if the skirt wasn a little louboutin kaufen berlin brief (as you mentioned but hanging out isn cute lol) I also not a fan on the gold, belt detailing but again don hate it!Lol they are atrocious! Honestly they've a low-priced pleather look, tacky lace up sides and massive chunky bottoms. I would not put on these for any million dollars lol.

General you've genuinely superior style and I totally agree with you on anything you mentioned specifically the part that thigh high boots don have to be slutty for positive!

http://xyj19901006.blog.com/2013/05/22/christian-louboutin-online-shop-no-cost/

http://blog.yahoo.com/_5AFSERYG5LMML3NVQTPW2ZRHJE/articles/1255535/index

www.facebook.com

New Post: Error "An event was unable to invoke any of the subscribers"

AboudDee — Sat, 18 May 2013 22:37:44 GMT

Yes, I did resolve it. The problem happens when Virtual Router isn't closed properly (ie when your connection disconnects or your computer locks up and needs to be restarted). The shared internet connection still has a lock on the share Virtual Router created, and so it can't create a new one.

Go into your Network and Sharing center

Then go to change adapter settings. Select the Internet adapter whose Internet connection you share with other devices (ie if you connect to the Internet using 3G, select that 3G. If you connect to the Internet using wireless, select that wireless). Make sure to select the connection Virtual Router was last using.

Go to Internet Sharing. Break the lock on the old share by setting the adapter to share its connection with something else (whatever you have handy; network adapter, wireless, anything). You'll get a warning about the old share still being in effect. Break the old share, click OK until the settings for your adapter closes.

Open up your adapter's settings again, and remove the shared connection you just created. Keep clicking OK to close the adapter's settings.

Start up Virtual router again, and enjoy.

This isn't a problem specific to VR, any similar app you try won't be able to create a share until you break the old one that VR had.

New Post: Masking character for password field

kir4n — Fri, 17 May 2013 05:26:53 GMT

It would be nice if we could mask the password field , may be a check box saying "Hide Characters"
would enable password field masking.

New Post: Virtual Router Problems

victorsai — Thu, 16 May 2013 04:27:29 GMT

i have tried all the above steps but virtual router is not letting me to share internet

virtual router is connected and the status is success and i have also tried through cmd prompt then also it is not letting to share internet

CAN ANYONE HELP ME WITH THIS ISSUE?

I THINK .NET FRAMEWORK INSTALLED MAY CAUSE THIS PROBLEM ... can anyone please suggest me hot to share internet.......

New Post: Error "An event was unable to invoke any of the subscribers"

naanku — Wed, 15 May 2013 08:15:12 GMT

I am also getting this error.

When I connect to Wireless Network Connection and share over Wireless Network Connection2 (virtual one) it works fine.
When I connect to Wireless 3g modem and share over Wireless Network Connection2 (virtual one) it shows the error.

Some one please help.

New Post: Error "An event was unable to invoke any of the subscribers"

SnakeFighter — Wed, 15 May 2013 07:34:35 GMT

I'm seeing this error, too. Did you make any progress with it?

New Post: Can I change the radio type?

zoobabwa — Mon, 13 May 2013 19:47:38 GMT

Hello!
Before I install this software, I have a quick question: Can I change the radio type with this software?
I have the hostednetwork set up on my windows 7 machine, but it is broadcasting in N mode. Can I change it to broadcast in B or G?

If it is not possible with this software, would anyone know if it possible at all?
Thanks,

New Post: Connected, but can't access Internet!

geniusone — Mon, 13 May 2013 12:55:54 GMT

Hi there, I found a solution to that: Turn off your firewall or change your firewall settings, it will work.

New Post: Unable to obtain IP address for android device

norbertkr — Mon, 13 May 2013 09:24:51 GMT

That's not the point.
Connection is there, but the Android-device (but also another notebook) doesn't get an IP-adress:
Android says: ... getting IP-adress and VirtRout shows: Hostname / IP-adress could not be found

Any working solution?

New Post: The group or resource is not in the correct state to perform the requested operation error?

parthpatels007 — Mon, 06 May 2013 14:09:23 GMT

thanks to YMatrix, your solution worked. Am on Win 8, HP G62 with Ralink wifi chip

New Post: Great application .

YogeshJumani — Sat, 04 May 2013 13:29:49 GMT

YogeshJumani wrote:

Hello

Its really great application .
Advantages:-

If i want to do process manually its takes time (saves time).

If person don't have WiFi modem they can share with this(saves money) .

Notify who is using our WiFi .

Thanks ,
Yogesh (India)

New Post: Great application .

YogeshJumani — Sat, 04 May 2013 13:29:02 GMT

Hello

Its really great application .
Advantages:-

If i want to do process manually its takes time (saves time).
If person don't have WiFi modem they can share with this(saves money) .
Notify who is using our WiFi .

Thanks ,
Yogesh (India)

New Post: missing automation for enabling hostednetwork mode ?

adrenochrome — Thu, 02 May 2013 15:22:50 GMT

it's wasnt working out of the box, i was forced to put the wifi card in hostednetwork mode before being able to the software :
netsh wlan set hostednetwork mode=allow
(else i was getting the "group or resource is not in the correct state to perform the requested operation" error, same behavior on 2 win7 systems)

why is it not automated in the software ?

anyway it's a really useful tool :)

regards,

New Post: Works fine now but had problems at first

St8kout — Thu, 02 May 2013 05:12:34 GMT

Gave me the resources error message until I rebooted, then stopped working when I tried to change the SSID name. I uninstalled it and made one more attempt at using Microsoft's Virtual Miniport Adapter setup where you go into Command and type in the "netsh wlan....etc" lines which still did not work. Installed it again and now it works perfectly even after changing the SSID name.

So it's a little finicky but it does work.

New Post: Version 1.0 doesn't work on Windows 7

capitano_nemo — Wed, 01 May 2013 06:43:13 GMT

This a great software.
Unfortunately, version 0.9 beta works fine, whereas new release 1.0 doesn't work: I can connect to LAN but I can't access to Internet.
I didn't get any error during installation: I stopped windows service and I uninstalled the previous release. Then I installed new release, with same Network Name and same Password.
All devices can connect to the host where VirtualRouter is installed, but they can't access to Internet.

So, I have rollbacked the installation and I have returned to the version 0.9 beta which works fine.

It is possible to activate a trace/debug?

Devices:

Server: Win 7 Ultimate 64 bit
Clients: Win 7 Home Premium 64 bit, Win Vista 32 bit, Samsung Smart TV, Galaxy S3, and other device.

Thanks for you answers.
Bye,
cn

New Post: Version 1.0 doesn't work on Windows 7

capitano_nemo — Wed, 01 May 2013 06:43:13 GMT

Server: Win 7 Ultimate 64 bit
Clients: Win 7 Home Premium 64 bit, Win Vista 32 bit, Samsung Smart TV, Galaxy S3, and other device.

Thanks for you answers.
Bye,
cn

New Post: Virtual Router Could Not Be Started

asifcheer — Tue, 30 Apr 2013 00:53:40 GMT

HELLO GUYS.....

I FINALLY FOUND IT MYSELF.......TRY THIS..
(make sure you have opened virtual router once before the procedure)

1) Go to the task manager

2) Make sure there is Virtual Router in the name column (which shows stopped in the status column )

3) Click on the __service...__button in the bottom right of the task manager . This will display the service window.

4) In the service list that appear search for VirtualRouterService. Righy click this and start the service...
ENJOY...
WORKS SURE

New Post: Virtual Adaptor not working since i installed it.

deepakmehta06 — Thu, 25 Apr 2013 20:28:30 GMT

Hi,

Today i installed the virtual adaptor, however it isn't working. Initially i was not getting anything in the dropdown for shared connection, it was showing none. But now its grayed out & i am getting Can not manager Virtual Router. The Service is not running. I tried to restart the service & also tried to kill it from task manager & opened it again. I tried to restart my laptop it did not helped either. I would appreciate if someone can help me to configure & use it.

Thanks
Deepak Mehta

New Post: Unable to obtain IP address for android device

PenaPP — Tue, 23 Apr 2013 21:15:56 GMT

Hello,
this is not solution - it's workaround :) But thank you anyways ;)